Home Categories Send inquiry

Din Rail power supply NDR-75-12 for industrial

Features

1. AC input range ,constant DC output

2. Protections: Short circuit / Overload / Over voltage / Over temperature

3. 100% full load burn-in test

4. Low cost, high reliability, good performance.

5. Widely used in Switch, industrial automation, device, etc.

6. 24 months warranty

Specifications

                                  Model NDR-75-12 NDR-75-24

OUTPUT

DC Voltage 12V 24V
Rated Current 6.3A 3.2A
Current Range 0-6.3A 0-3.2A
Rated Power 75W 75W
Ripple & Noise (max.) Note.2 80mVp-p 120mVp-p
Voltage Adj. Range 12 ~ 14V 24 ~ 48V
Voltage Tolerance Note.3 ±2% ±1%
LINE REGULATION ±0.5% ±0.5%
LOAD REGULATION ±1% ±1%
Setup, Rise Time 1200ms,60ms/230VAC 2500ms,60ms/115VAC at full load
Hold Up Time 16ms/230VAC 10ms/115VAC at full load

INPUT

Voltage Range 85~264VAC 120~370VDC
FREQUENCY RANGE 47~63Hz
AC Current 1.45A/115V 0.9A/230V
Efficiency 88% 88%
Inrush Current COLD START 15A/115VAC 30A/230VAC

PROTECTION

Over Load 105%~150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage 14~17V 29~33V
Protection type : Shut down o/p voltage, re-power on to recover
  Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMENT

Working Temp., -20℃~+70℃
WORKING HUMIDITY 20 ~ 95% RH non-condensing
Storage Temp., Humidity -40℃~+85℃, 10~95% RH
Temp. Coefficient ±0.03%/°C(0~50°C)
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSION Compliance to EN55032, EN55035 Class B, EN61000-3-2,-3
  DIMENSION 32*125.2*102 mm

Din Rail power supply NDR-75-12 for industrial Related Video: